Green Color Liquid Silicone Rubber Injection Molding Equipment High Efficiency

Product Description

Liquid Silicone Rubber Injection Molding Silicone Mask Lsr Molding
 

The difference of silicone mask and TPE mask

1. TPE belongs to plastic. After molding, it will have a certain plastic smell. The material will be hard and the surface will be rough. The molding process of TPE mask is more traditional injection molding process. The processing cost will be lower and the price will be lower.

2. The liquid silica gel material belongs to the environmental protection type material. After forming, it has no smell, the surface treatment will be very delicate, and the touch touch touch with human body is very soft. The product surface can be sunburned and polished, and the air tightness is very good. Of course, the molding process cost of the liquid silica gel protective mask will be higher, and the sales price will be higher.

Machine Model Parameter

The design of silicone gas mask is very important. The design of face contact needs to be close to the skin, with good air tightness and moderate hardness. Choosing silicone material mask will give people good comfort and will not easily cause allergic reactions.

Secondly, the design of the breathing valve is related to the comfort of breathing after wearing. The general silica gel gas mask will be equipped with silica gel breathing valve. According to the influence of breathing resistance, the structural design, hardness and support strength of the breathing valve are very important. These can be done a sample test before making a whole set of products to get the best design.